မြင့်မားသောခဲယဉ်းအဖြူ extruded ကြိမ်လုံး polyethylene လှံတံ

High-density polyethylene (HDPE) is a white powder or granular product. It is non-toxic, tasteless, crystallinity is 80%-90%, softening point is 125-135℃, service temperature can reach 100℃; hardness, tensile strength and creep are better than low-density polyethylene; wear resistance, electricity Good insulation, toughness and cold resistance; good chemical stability, insoluble in any organic solvents at room temperature, corrosion resistance to acids, alkalis and various salts; low permeability to water vapor and air, water absorption Low; poor aging resistance, environmental stress cracking resistance is not as good as low-density polyethylene, especially thermal oxidation will reduce its performance, so antioxidants and ultraviolet absorbers must be added to the resin to improve this deficiency. High-density polyethylene film has a lower thermal deformation temperature under stress, so pay attention to it when applying it.

အားသာချက်:

1. Average molecular weight about 5,000,000 to 9,000,000;

2.The best abrasive assistance of all plastics , which 4 times higher than that of nylon 66 or teflon and 6 times higher than that of carbon steel;

3.Extremely high impact stength ,which is twice as high as PC ,5 times as high as ABS,it also retaines high toughness at liquid nitrogen temperature (-196'C);

4.Low friction coefficient ,lubricity is equal to that of Teflon ;

5.The best impact energy absorption value of all plastics ,with very good sound reduction effect ;

6.High chemical stability ,capable of resisting various types of corrosion and organic media within certain temperature and concentration range;

7.Strong adhensive resistance which is only second to Teflon;

8.It is safe , healthful and non-toxic and be can used in contact with food and drugs ;

9.Low density than any other thermoplastic ;

10.Excellent electrical insulation and static resistance ,good resistance to high energy radiation;

11.Moderate mechanical strength,stiffness and creep-resistant property'

12.Outstanding machining property ,very low water absorption .

လျှောက်လွှာ -

Papermaking industry : suction box boards ,scrapper,molding plate ,beating ,gear .

Mining industry : charging barrel ,abrasive and adhensive -resistant back lining for warehouses.

Chemical industry : acid pump ,fliter plate , worm gear ,bearing .

Food industry :packing machinery parts ,bottle guide ,screw .wear plate ,slide away ,stud weld ,roller and other transmission parts.

Tenxile industry : buffer board

Food processing industry : chopping block ,refrigerating plant

Wharf:anti-collision board

နည်းပညာပိုင်းဆိုင်ရာဒေတာစာရွက်

UHMW-PE plastic rod

လုပ်ငန်းများ၌ Semi- ချောထုတ်ကုန်

လက်ခံနိုင်သောခဲအချိန် (ချိန်ညှိစက်ရုံအချိန်ဇယား)

စက်ရုံထိန်းချုပ်မှုအရည်အသွေး

ယှဉ်ပြိုင်စက်ရုံစျေးနှုန်း

Noegem သည် 0 န်ဆောင်မှုခံယူသူအားလုံးအတွက်အရည်အသွေးကောင်းသည်။

သင်သည် Noegem မှအကောင်းဆုံး 0 န်ဆောင်မှုကိုရရှိလိမ့်မည်။

ကျွန်တော်တို့ရဲ့စက်ရုံကိုသွားလည်ပါ။

ကျွန်ုပ်တို့၏ကုမ္ပဏီ၏အဓိကစီးပွားရေးလုပ်ငန်းမှာ Pom ပလတ်စတစ်ပြား, PAI ပလတ်စတစ်ပြား, PAEP ပလပ်စတစ်ပြား, PA ပလပ်စတစ်စာရွက်, PC ပလပ်စတစ်စာရွက်,